Millennia Media TD-1 Single Channel Class A Music Recording System

Full Description

Indestructible Military Grade Chassis

The Millenia Media TD-1 employs twin topology so you no longer have to choose between tube or solid state front end to get the perfect sound. The TD-1 offers either a 100 percent vacuum tube instrument amp or transparent 100 percent discrete F.E.T. solid state instrument amp all in the same indestructible military grade chassis. These 2 different states are switch selectable and can be musically tuned by using the 3 selectable input impedances.

Audiophile Quality

Millenia Media's TD-1 is fantastic in any setup thanks to its nine outputs. These include balanced and unbalanced line on XLR and 1/4 " as well as two 1/4 " reamp outputs a balanced transformer output, an audiophile quality headphone output and a direct output.

Realistic Feel

The TD-1 is well suited for guitars and bass thanks to its speaker soak technology that enables you to run your amps power straight into the TD-1 that gives you the realistic feel and sound of playing live.

Features

• High speed transformerless, pure Class A, 350 volt triode design
• Differential topology: no attenuator "pads" required
• Effortless dynamics, vividly realistic ambience
• >35 dBu output headroom
• High resolution gain control
• Precision potentiometers, ultra-premium components
• Built for critical professional applications
• Gold audio connectors, tube sockets, and relays
• 3/8" thick radius extruded aluminum face plate
• Durable mirror-gloss anodized finish
• Mil spec 16 gauge cold-rolled steel chassis
• Ultra-clean toroid power supply: internal sub-chassis
• Hand machined aluminum knobs illuminated IT&T push buttons
• Richly musical vintage vacuum tubes available
• Mogami Neglex OFC audio wiring
• Silver Teflon power wiring

Specifications

Preamplifiers & General

• Instrument / DI Input Amplifier Twin Topology:
  • TUBE: Selected twin triode vacuum tube amplifier (200 V)
  • SOLID STATE: Selected all discrete J-FET amplifier (50 V)
• THD + Noise, 20 Hz - 30 kHz (35 dB Gain):
  • 0.0005% typical mic / line, 0.03% typical vacuum tube
• Intermodulation Distortion:
  • 0.0009% typical mic / line, 0.03% typical vacuum tube
• Frequency Response @ -3 dB points:
  • 3 Hz to 300 kHz, typical. Varies with routing & topology
• Maximum Balanced Line Input Level:
  • +23 dBu (+43 dBu with Pad engaged or > 110 Volts rms)
• Maximum DI Input Level (Both Tube & SS):
  • +18 dBu (+26 dBu with Pad engaged or > 15 Volts rms)
• Maximum Output Level:
  • +32 dBu active balanced outputs, +26 dBu unbal outputs
• Maximum System Gain:
  • 45 dB standard (65 dB with optional HV-3 mic preamp)
• Input Impedance (DI):
  • Switchable: 470 kilohms / 2 megohms / 10 megohms
• Noise (Mic) (60 dB gain):
  • -128 dB EIN, 150 ohm source, -130 dB EIN common source
• Noise (Line) (10 dB gain):
  • -105 dBu
• Noise (DI) (10 dB gain):
  • -90 dBu (solid state)
• Phase Error (EQ out):
  • Less than +/- 5 degrees 50 Hz to 20 kHz

Parametric Equalisation

• Maximum Boost and Cut:
  • +/- 15 dB (21 step detent)
• "Q" Range:
  • Q+ 0.4 to 4.0 sweepable
• Low Freq Sweep:
  • 20 Hz to 220 Hz or 200 Hz to 2.2 kHz
  • 10X Range switch selectable
• Hi Freq Sweep:
  • 250 to 2.5 kHz or 2.5 kHz to 25 kHz
  • 10X Range switch selectable
• Power Consumption: 35 Watts Max
• Power Requirements:
  • Selectable:
    • 100-120
    • 200-240 V ac
    • 50/60 Hz
• Dimensions/Shipping Weight: 8.5" W x 3.5" H x 13" D, 20 lbs